Princess Bezel Set Lab-Grown Diamond Ring
Princess Bezel Set Lab-Grown Diamond Ring
Princess Bezel Set Lab-Grown Diamond Ring
Under 1 ct
1 to 2 ct
Not sure which carat to choose?See how each size looks on a finger.
Not sure of your size? Choose Size later and we'll contact you after you order to confirm it.
Carat size on the finger
Drawn to scale on a size 6 finger (16.5 mm wide). Sizes are approximate face-up measurements.
Carat is weight, not size. A 2.00 ct stone looks about 25–30% wider than a 1.00 ct, not twice as wide. On a slimmer finger the same stone looks bigger.
Diamond colour & clarity
Colour runs from D, with no colour at all, towards a faint yellow. D–F look icy white. G–H look white once set, especially in yellow or rose gold.
Clarity is how many tiny natural marks a diamond has. From VS1 upwards they can't be seen without 10× magnification.
| Grade | What it means |
|---|---|
| FL · IF | Flawless — nothing seen at 10× |
| VVS1 · VVS2 | Very, very slight — very hard to find at 10× |
| VS1 · VS2 | Very slight — eye-clean, minor marks at 10× |
| SI1 · SI2 | Slight — usually eye-clean in smaller stones |
| I1 | Included — marks may be visible to the eye |
Ring size guide
Measure a ring that already fits, or wrap a strip of paper around your finger. If you're between sizes, go up one.
| US | UK | EU | Inside diameter | Circumference |
|---|---|---|---|---|
| 3.0 | F½ | 44 | 14.1 mm | 44.2 mm |
| 3.5 | G½ | 45 | 14.5 mm | 45.5 mm |
| 4.0 | H½ | 47 | 14.9 mm | 46.8 mm |
| 4.5 | I½ | 48 | 15.3 mm | 48.0 mm |
| 5.0 | J½ | 49 | 15.7 mm | 49.3 mm |
| 5.5 | K½ | 50 | 16.1 mm | 50.6 mm |
| 6.0 | L½ | 52 | 16.5 mm | 51.9 mm |
| 6.5 | M½ | 53 | 16.9 mm | 53.1 mm |
| 7.0 | N½ | 54 | 17.3 mm | 54.4 mm |
| 7.5 | O½ | 55 | 17.7 mm | 55.7 mm |
| 8.0 | P½ | 57 | 18.1 mm | 57.0 mm |
| 8.5 | Q½ | 58 | 18.5 mm | 58.2 mm |
| 9.0 | R½ | 59 | 18.9 mm | 59.5 mm |
| 9.5 | S½ | 60 | 19.4 mm | 60.8 mm |
| 10.0 | T½ | 62 | 19.8 mm | 62.1 mm |
| 10.5 | U½ | 63 | 20.2 mm | 63.3 mm |
| 11.0 | V½ | 64 | 20.6 mm | 64.6 mm |
| 11.5 | W½ | 65 | 21.0 mm | 65.9 mm |
| 12.0 | Y | 67 | 21.4 mm | 67.2 mm |
| 12.5 | Z | 68 | 21.8 mm | 68.5 mm |
| 13.0 | Z+1 | 69 | 22.2 mm | 69.7 mm |
- Wrap a strip of paper around the base of your finger, snug but not tight.
- Mark where it overlaps and measure the length in mm. That's your circumference.
- Find the nearest circumference above. Measure at the end of the day, when fingers are largest.
Still unsure? Choose Size later in the size list. We'll contact you after you order to confirm your size before we start making your ring.
Framed in a smooth bezel setting, a sharp princess cut lab-grown diamond acts as the focal point of this solitaire design. Multi-row shoulders offer subtle structural detail, transitioning into a high-polish flat shank. An openwork gallery allows light to reach the center stone, creating a balance of security and brightness. Select your preferred finish from gold, silver, or platinum.
At a glance
- Princess lab-grown diamond centre stone
- Bezel setting
- Openwork gallery
- Multi-Row shoulders
- High Polish Flat shank
- Available in 5 metals (Yellow Gold, Rose Gold, White Gold +more)
The sharp square outline of the princess cut stone paired with a flush bezel setting creates a clean, architectural silhouette on the hand. Its snag-free profile and comfortable flat band make it an easy choice for active daily wear.
This solitaire piece highlights the clean geometry of a princess cut lab-grown diamond. Surrounding the center stone, a full bezel setting provides a flush rim that protects the corners from everyday contact. Below the main setting, an openwork gallery exposes the sides of the stone, giving light freedom to enter and bounce through the lab-grown diamond facets. Moving outward, the multi-row shoulders create a textured profile along the top of the ring, drawing attention toward the center. These detailed shoulders seamlessly blend into a solid, flat shank finished with a high-polish sheen that feels smooth against the finger. Available in yellow gold, rose gold, white gold, silver, or platinum, this design blends physical protection with clear structural lines for a grounded, wearable piece.
You may also like
Why this ring
Protective Bezel Frame
The full rim encloses the princess cut lab-grown diamond completely, shielding its corners from impacts while creating a smooth, snag-free edge.
Openwork Gallery Design
Cutouts beneath the setting allow light to filter through the lower facets of the center stone, enhancing its visual presence.
Multi-Row Band Texture
Divided shoulder rows introduce structural detail that directs attention straight to the center lab-grown diamond.
Flat High-Polish Shank
The flat inner and outer profile rests comfortably against neighboring fingers, finished with a bright reflective polish.
Details
- Stone Shape: Princess lab-grown diamond
- Setting: Bezel
- Gallery: Openwork gallery
- Shoulders: Multi-Row shoulders
- Band / Shank: High Polish Flat shank
- Metal Options: Yellow Gold, Rose Gold, White Gold, Silver, Platinum
FAQs
How does the bezel setting protect the princess cut lab-grown diamond?
The continuous rim encloses all four corners and edges of the princess cut stone, shielding them against accidental bumps and preventing snags on clothing.
Does the openwork gallery affect how light enters the lab-grown diamond?
Yes, the openwork design leaves the sides beneath the main setting unblocked, allowing light to reach the lower facets of the stone.
What does the multi-row shoulder design look like on the finger?
The shoulders feature multiple parallel metal rows that add subtle architectural depth on either side of the center setting before smoothing out into the flat shank.
Is the high-polish flat shank comfortable for daily wear?
The flat profile sits flush against adjacent fingers, while the polished surface provides a smooth feeling throughout the day.
Which metal options are available for this solitaire ring?
You can choose to have this ring crafted in yellow gold, rose gold, white gold, silver, or platinum.
