Asscher Cut Basket with Corner Prongs Solitaire Ring
Asscher Cut Basket with Corner Prongs Solitaire Ring
Asscher Cut Basket with Corner Prongs Solitaire Ring
Under 1 ct
1 to 2 ct
2 to 3 ct
3 to 5 ct
5 ct and above
Not sure which carat to choose?See how each size looks on a finger.
Not sure of your size? Choose Size later and we'll contact you after you order to confirm it.
Carat size on the finger
Drawn to scale on a size 6 finger (16.5 mm wide). Sizes are approximate face-up measurements.
Carat is weight, not size. A 2.00 ct stone looks about 25–30% wider than a 1.00 ct, not twice as wide. On a slimmer finger the same stone looks bigger.
Diamond colour & clarity
Colour runs from D, with no colour at all, towards a faint yellow. D–F look icy white. G–H look white once set, especially in yellow or rose gold.
Clarity is how many tiny natural marks a diamond has. From VS1 upwards they can't be seen without 10× magnification.
| Grade | What it means |
|---|---|
| FL · IF | Flawless — nothing seen at 10× |
| VVS1 · VVS2 | Very, very slight — very hard to find at 10× |
| VS1 · VS2 | Very slight — eye-clean, minor marks at 10× |
| SI1 · SI2 | Slight — usually eye-clean in smaller stones |
| I1 | Included — marks may be visible to the eye |
Ring size guide
Measure a ring that already fits, or wrap a strip of paper around your finger. If you're between sizes, go up one.
| US | UK | EU | Inside diameter | Circumference |
|---|---|---|---|---|
| 3.0 | F½ | 44 | 14.1 mm | 44.2 mm |
| 3.5 | G½ | 45 | 14.5 mm | 45.5 mm |
| 4.0 | H½ | 47 | 14.9 mm | 46.8 mm |
| 4.5 | I½ | 48 | 15.3 mm | 48.0 mm |
| 5.0 | J½ | 49 | 15.7 mm | 49.3 mm |
| 5.5 | K½ | 50 | 16.1 mm | 50.6 mm |
| 6.0 | L½ | 52 | 16.5 mm | 51.9 mm |
| 6.5 | M½ | 53 | 16.9 mm | 53.1 mm |
| 7.0 | N½ | 54 | 17.3 mm | 54.4 mm |
| 7.5 | O½ | 55 | 17.7 mm | 55.7 mm |
| 8.0 | P½ | 57 | 18.1 mm | 57.0 mm |
| 8.5 | Q½ | 58 | 18.5 mm | 58.2 mm |
| 9.0 | R½ | 59 | 18.9 mm | 59.5 mm |
| 9.5 | S½ | 60 | 19.4 mm | 60.8 mm |
| 10.0 | T½ | 62 | 19.8 mm | 62.1 mm |
| 10.5 | U½ | 63 | 20.2 mm | 63.3 mm |
| 11.0 | V½ | 64 | 20.6 mm | 64.6 mm |
| 11.5 | W½ | 65 | 21.0 mm | 65.9 mm |
| 12.0 | Y | 67 | 21.4 mm | 67.2 mm |
| 12.5 | Z | 68 | 21.8 mm | 68.5 mm |
| 13.0 | Z+1 | 69 | 22.2 mm | 69.7 mm |
- Wrap a strip of paper around the base of your finger, snug but not tight.
- Mark where it overlaps and measure the length in mm. That's your circumference.
- Find the nearest circumference above. Measure at the end of the day, when fingers are largest.
Still unsure? Choose Size later in the size list. We'll contact you after you order to confirm your size before we start making your ring.
Corner prongs cradle a sharp Asscher cut lab-grown diamond in this balanced solitaire ring. Mounted atop a peg head setting, the focal stone rises neatly above a smooth round band finished with a mirror-like high polish. Non-cathedral shoulders maintain clean lines along the profile, creating a focal point purely focused on geometric clarity and structural harmony.
At a glance
- Asscher Cut lab-grown diamond centre stone
- Four-prong setting
- Peg Head setting
- Non-Cathedral shoulders
- High Polish Round shank
- Available in 5 metals (Yellow Gold, Rose Gold, White Gold +more)
The hallmark of this solitaire design lies in its strong geometric symmetry, combining an Asscher cut lab-grown diamond with four precise corner prongs. Wearers will appreciate how the elevated peg head setting and unadorned high-polish band deliver a clean look that fits comfortably for daily wear.
Centered on distinct geometry, this ring presents a square Asscher cut lab-grown diamond as its sole focus. Four sturdy corner prongs anchor the stone inside an open basket, allowing light to flow freely through the step-cut facets. The basket sits in an elevated peg head setting, raising the centerpiece distinctly above the band. Along the sides, non-cathedral shoulders taper gently into a traditional round shank without extra embellishments or accent stones. A high-polish finish wraps around the entire circumference, giving the metal a smooth, reflective surface. Resting comfortably against the finger, the ring offers a seamless profile that pairs easily with other bands or stands confidently on its own. Choose from white gold, yellow gold, rose gold, silver, or platinum to customize the metal finish to your preference.
You may also like
Why this ring
Geometric Step-Cut Silhouette
The Asscher cut lab-grown diamond features concentric square facets that produce a distinctive hall-of-mirrors optical pattern.
Corner-Framed Security
Four dedicated corner prongs protect the angled edges of the square stone while clearly defining its outer silhouette.
Elevated Peg Head Profile
The peg head architecture raises the central stone above the band, allowing light to enter freely from all angles.
Clean Non-Cathedral Shoulders
Straight, unlifted shoulders keep total focus on the centerpiece without added visual complexity along the band.
Smooth High-Polish Round Band
A traditional round shank with a mirror-like high-polish finish offers a soft, seamless fit between adjacent fingers.
Details
- Stone Shape: Asscher Cut lab-grown diamond
- Prong Setting: Four-prong
- Setting: Peg Head
- Shoulders: Non-Cathedral shoulders
- Band / Shank: High Polish Round shank
- Metal Options: Yellow Gold, Rose Gold, White Gold, Silver, Platinum
FAQs
What center stone shape is featured in this solitaire ring?
This ring features a square Asscher cut lab-grown diamond as its central focus.
How is the center stone secured in the setting?
The lab-grown diamond rests in a peg head basket held securely by four prongs positioned directly on the corners.
Does this ring feature any accent stones along the band?
No, this is a clean solitaire design crafted without any accent stones.
What shoulder and band style does this ring have?
The ring incorporates non-cathedral shoulders leading into a smooth, round shank with a high-polish finish.
Which metal options are available for this ring?
You can select your ring in Yellow Gold, Rose Gold, White Gold, Silver, or Platinum.
