Emerald Cross-Over Hidden Halo Pavé Engagement Ring
Emerald Cross-Over Hidden Halo Pavé Engagement Ring
Emerald Cross-Over Hidden Halo Pavé Engagement Ring
Under 1 ct
1 to 2 ct
2 to 3 ct
3 to 5 ct
5 ct and above
Not sure which carat to choose?See how each size looks on a finger.
Not sure of your size? Choose Size later and we'll contact you after you order to confirm it.
Carat size on the finger
Drawn to scale on a size 6 finger (16.5 mm wide). Sizes are approximate face-up measurements.
Carat is weight, not size. A 2.00 ct stone looks about 25–30% wider than a 1.00 ct, not twice as wide. On a slimmer finger the same stone looks bigger.
Diamond colour & clarity
Colour runs from D, with no colour at all, towards a faint yellow. D–F look icy white. G–H look white once set, especially in yellow or rose gold.
Clarity is how many tiny natural marks a diamond has. From VS1 upwards they can't be seen without 10× magnification.
| Grade | What it means |
|---|---|
| FL · IF | Flawless — nothing seen at 10× |
| VVS1 · VVS2 | Very, very slight — very hard to find at 10× |
| VS1 · VS2 | Very slight — eye-clean, minor marks at 10× |
| SI1 · SI2 | Slight — usually eye-clean in smaller stones |
| I1 | Included — marks may be visible to the eye |
Ring size guide
Measure a ring that already fits, or wrap a strip of paper around your finger. If you're between sizes, go up one.
| US | UK | EU | Inside diameter | Circumference |
|---|---|---|---|---|
| 3.0 | F½ | 44 | 14.1 mm | 44.2 mm |
| 3.5 | G½ | 45 | 14.5 mm | 45.5 mm |
| 4.0 | H½ | 47 | 14.9 mm | 46.8 mm |
| 4.5 | I½ | 48 | 15.3 mm | 48.0 mm |
| 5.0 | J½ | 49 | 15.7 mm | 49.3 mm |
| 5.5 | K½ | 50 | 16.1 mm | 50.6 mm |
| 6.0 | L½ | 52 | 16.5 mm | 51.9 mm |
| 6.5 | M½ | 53 | 16.9 mm | 53.1 mm |
| 7.0 | N½ | 54 | 17.3 mm | 54.4 mm |
| 7.5 | O½ | 55 | 17.7 mm | 55.7 mm |
| 8.0 | P½ | 57 | 18.1 mm | 57.0 mm |
| 8.5 | Q½ | 58 | 18.5 mm | 58.2 mm |
| 9.0 | R½ | 59 | 18.9 mm | 59.5 mm |
| 9.5 | S½ | 60 | 19.4 mm | 60.8 mm |
| 10.0 | T½ | 62 | 19.8 mm | 62.1 mm |
| 10.5 | U½ | 63 | 20.2 mm | 63.3 mm |
| 11.0 | V½ | 64 | 20.6 mm | 64.6 mm |
| 11.5 | W½ | 65 | 21.0 mm | 65.9 mm |
| 12.0 | Y | 67 | 21.4 mm | 67.2 mm |
| 12.5 | Z | 68 | 21.8 mm | 68.5 mm |
| 13.0 | Z+1 | 69 | 22.2 mm | 69.7 mm |
- Wrap a strip of paper around the base of your finger, snug but not tight.
- Mark where it overlaps and measure the length in mm. That's your circumference.
- Find the nearest circumference above. Measure at the end of the day, when fingers are largest.
Still unsure? Choose Size later in the size list. We'll contact you after you order to confirm your size before we start making your ring.
Built around a rectangular emerald-cut lab-grown diamond, this solitaire ring utilizes a four-prong peg head setting elevated above a hidden halo gallery. Standard shoulders connect seamlessly to a high-polish round shank for a balanced silhouette. Select your preferred metal, from classic yellow gold to platinum, for a tailored finish that highlights the clear lines of the lab-grown diamond.
At a glance
- Emerald lab-grown diamond centre stone
- Four-prong setting
- Peg Head setting
- Hidden Halo gallery
- Standard shoulders
- High Polish Round shank
- Available in 5 metals (Yellow Gold, Rose Gold, White Gold +more)
The crisp geometry of the emerald-cut lab-grown diamond pairs with a clean high-polish band for a focal point that feels grounded and clean. Wearers will appreciate how the raised peg head and hidden halo gallery add structural depth when viewed from every angle.
Centered on an emerald-cut lab-grown diamond, this solitaire ring brings crisp geometric focus to the finger. The center stone is secured by four prongs within a peg head setting, elevating the lab-grown diamond above the band to maximize light entry. Beneath the center stone, a hidden halo gallery adds structural interest visible from the side profile. Standard shoulders transition into a smooth, round shank with a high-polish finish that rests comfortably against adjacent fingers. Free of accent stones, the design relies on precise proportions and clean metalwork to accentuate the step-cut facets of the lab-grown diamond. Custom options allow you to choose between yellow gold, rose gold, white gold, silver, or platinum to suit your individual preference.
You may also like
Why this ring
Geometric Step-Cut Center
The emerald-cut lab-grown diamond features long, parallel facets that create a clear visual field across the top of the ring.
Architectural Hidden Halo
A hidden halo gallery beneath the setting introduces subtle detail along the side profile while elevating the main lab-grown diamond.
Elevated Peg Head Setting
Four secure prongs lift the lab-grown diamond high above the band, allowing light to enter freely from all sides.
Smooth High-Polish Band
The round shank and standard shoulders feature a reflective finish that provides continuous shine and daily wear comfort.
Details
- Stone Shape: Emerald lab-grown diamond
- Prong Setting: Four-prong
- Setting: Peg Head
- Gallery: Hidden Halo gallery
- Shoulders: Standard shoulders
- Band / Shank: High Polish Round shank
- Metal Options: Yellow Gold, Rose Gold, White Gold, Silver, Platinum
FAQs
What shape is the center stone in this solitaire ring?
The ring features a rectangular emerald-cut lab-grown diamond held securely by four prongs.
What setting style holds the lab-grown diamond?
The lab-grown diamond is mounted in a four-prong peg head with an integrated hidden halo gallery.
Does this engagement ring feature any accent stones?
No, this design is a clean solitaire ring with no accent stones along the band or shoulders.
Which metals can I select for this solitaire ring?
You can choose to craft this ring in yellow gold, rose gold, white gold, silver, or platinum.
What is the shape and finish of the ring band?
The band features a traditional round shank with standard shoulders and a smooth, high-polish finish.
