Pear Split Shank Solitaire Lab-Grown Diamond Ring
Pear Split Shank Solitaire Lab-Grown Diamond Ring
Pear Split Shank Solitaire Lab-Grown Diamond Ring
Under 1 ct
1 to 2 ct
2 to 3 ct
3 to 5 ct
5 ct and above
Not sure which carat to choose?See how each size looks on a finger.
Not sure of your size? Choose Size later and we'll contact you after you order to confirm it.
Carat size on the finger
Drawn to scale on a size 6 finger (16.5 mm wide). Sizes are approximate face-up measurements.
Carat is weight, not size. A 2.00 ct stone looks about 25–30% wider than a 1.00 ct, not twice as wide. On a slimmer finger the same stone looks bigger.
Diamond colour & clarity
Colour runs from D, with no colour at all, towards a faint yellow. D–F look icy white. G–H look white once set, especially in yellow or rose gold.
Clarity is how many tiny natural marks a diamond has. From VS1 upwards they can't be seen without 10× magnification.
| Grade | What it means |
|---|---|
| FL · IF | Flawless — nothing seen at 10× |
| VVS1 · VVS2 | Very, very slight — very hard to find at 10× |
| VS1 · VS2 | Very slight — eye-clean, minor marks at 10× |
| SI1 · SI2 | Slight — usually eye-clean in smaller stones |
| I1 | Included — marks may be visible to the eye |
Ring size guide
Measure a ring that already fits, or wrap a strip of paper around your finger. If you're between sizes, go up one.
| US | UK | EU | Inside diameter | Circumference |
|---|---|---|---|---|
| 3.0 | F½ | 44 | 14.1 mm | 44.2 mm |
| 3.5 | G½ | 45 | 14.5 mm | 45.5 mm |
| 4.0 | H½ | 47 | 14.9 mm | 46.8 mm |
| 4.5 | I½ | 48 | 15.3 mm | 48.0 mm |
| 5.0 | J½ | 49 | 15.7 mm | 49.3 mm |
| 5.5 | K½ | 50 | 16.1 mm | 50.6 mm |
| 6.0 | L½ | 52 | 16.5 mm | 51.9 mm |
| 6.5 | M½ | 53 | 16.9 mm | 53.1 mm |
| 7.0 | N½ | 54 | 17.3 mm | 54.4 mm |
| 7.5 | O½ | 55 | 17.7 mm | 55.7 mm |
| 8.0 | P½ | 57 | 18.1 mm | 57.0 mm |
| 8.5 | Q½ | 58 | 18.5 mm | 58.2 mm |
| 9.0 | R½ | 59 | 18.9 mm | 59.5 mm |
| 9.5 | S½ | 60 | 19.4 mm | 60.8 mm |
| 10.0 | T½ | 62 | 19.8 mm | 62.1 mm |
| 10.5 | U½ | 63 | 20.2 mm | 63.3 mm |
| 11.0 | V½ | 64 | 20.6 mm | 64.6 mm |
| 11.5 | W½ | 65 | 21.0 mm | 65.9 mm |
| 12.0 | Y | 67 | 21.4 mm | 67.2 mm |
| 12.5 | Z | 68 | 21.8 mm | 68.5 mm |
| 13.0 | Z+1 | 69 | 22.2 mm | 69.7 mm |
- Wrap a strip of paper around the base of your finger, snug but not tight.
- Mark where it overlaps and measure the length in mm. That's your circumference.
- Find the nearest circumference above. Measure at the end of the day, when fingers are largest.
Still unsure? Choose Size later in the size list. We'll contact you after you order to confirm your size before we start making your ring.
Designed with clean lines, this solitaire ring highlights a pear lab-grown diamond held by three prongs. The band divides near the center to form split shoulders, framing an open gallery beneath the stone. Finished with a high-polish, round shank, it delivers a comfortable fit and classic silhouette available in platinum, silver, or gold.
At a glance
- Pear lab-grown diamond centre stone
- Three-prong setting
- Split Shank Solitaire setting
- Open Gallery gallery
- Split Shoulder shoulders
- High Polish Round shank
- Available in 5 metals (Yellow Gold, Rose Gold, White Gold +more)
The combination of a pointed pear lab-grown diamond and open split shoulders gives this solitaire a balanced, airy appearance on the finger. Wearers will appreciate how the unadorned high-polish metal keeps full attention on the main stone while providing a comfortable, smooth feel.
This solitaire ring places a pear lab-grown diamond at the visual center, anchored by a minimal three-prong setting that leaves the stone's edges clearly visible. The architectural split shoulder band branches out as it approaches the stone, creating negative space that balances the teardrop contour. An open gallery underneath lets light pass freely through the base of the lab-grown diamond, while maintaining a clean profile against the finger. The band transitions into a traditional round shank with a mirror-like high-polish finish. Free of accent stones, the focus remains entirely on the primary gem and the symmetry of the setting. Available in platinum, silver, or yellow, white, and rose gold, this piece offers a refined profile suited for daily wear.
You may also like
Why this ring
Defined Teardrop Contour
The pear lab-grown diamond offers a sharp point and rounded base, elongating the visual line on your finger.
Minimal Three-Prong Hold
Three prongs secure the stone while leaving the maximum amount of surface exposed to surrounding light.
Light-Sensing Open Gallery
An open structural design beneath the center stone allows light to enter from all angles, boosting overall brightness.
Architectural Split Shoulders
The band branches slightly as it reaches the setting, adding structural detail and visual weight near the stone.
Smooth Round Shank
The rounded band shape and high-polish finish ensure the ring sits comfortably against neighboring fingers all day.
Details
- Stone Shape: Pear lab-grown diamond
- Prong Setting: Three-prong
- Setting: Split Shank Solitaire
- Gallery: Open Gallery gallery
- Shoulders: Split Shoulder shoulders
- Band / Shank: High Polish Round shank
- Metal Options: Yellow Gold, Rose Gold, White Gold, Silver, Platinum
FAQs
How many prongs secure the pear lab-grown diamond?
The ring uses a three-prong setting specifically arranged to protect the point and body of the pear stone.
Does this split shank ring feature any accent stones?
No, this is a clean solitaire design with no accent stones on the band or gallery.
What does the open gallery structure do?
The open gallery leaves the underside of the lab-grown diamond exposed, allowing light to flow through the gem.
What band metals can I select for this solitaire?
You can choose from yellow gold, rose gold, white gold, silver, or platinum.
Is the shank flat or rounded on the finger?
The shank is fully round with a high-polish finish for smooth, easy everyday wear.
